## Info

\ \

M,Ed <l1,Rd where 11Rd is the value of 11Rd for an X joint from Table 7.11.

The member 1 is always in compression and member 2 is always in tension.

The member 1 is always in compression and member 2 is always in tension.

jVi.Ed sin 6>i + JV3,Ed sin 03 < NhRd sin 6X Nzm sin 02 < M,Rd sin 6\

where 11Rd is the value of 11Rd for a K joint from b1 + b2 + U + h2

Table 7.12, but with

4i replaced by:

All bracing members shall be either compression or tension.

Ni No

where NxRd is the value of 1xRd for an X joint from Table 7.11, and iVx Rd sin 0X is the larger of:

Member 1 is always in compression and member 2 is always in tension.

Ni N2

1i,Ed <1i,Rd where 1iRd is the value of 1iRd for a K joint from Table 7.12, provided that, in a gap-type joint, at section 1-1 the chord satisfies:

## Post a comment