Geotechnical Design Report

The contents of the Geotechnical Design Report are specified (as a Principle) in EN 1997-1:

The assumptions, data, methods of calculations and results of the verification of safety and serviceability shall be recorded in the Geotechnical Design Report. [EN 1997-1 ยง2.8(1)P]

In simple terms:

GDR = Assumptions + Data + Methods + Verification

The contents of the GDR are illustrated in Figure 16.6 and discussed below. The level of detail included in the GDR depends on the type of design -simple designs may only require a single-sheet report (although these will tend to be limited to Geotechnical Category 1 structures).



Supervision, monitoring, S maintenance requirements

Plan of supervision & monitoring

0 0

Post a comment