Fig. 4.15. Beam on supports.

Fig. 4.15. Beam on supports.

For other types of bearing conditions the requirements are given in EC5, 6.1.5(4) to 6.1.5(7), and some of the more common conditions are covered in the following sections. Bearing stress when the member is resting on a continuous support

Where the member has continuous support along its length and across its full width and has a ratio of h/b < 2.5:

(i) For a member loaded with a concentrated compressive force applied over the full width b of the member that is directly over a continuous support on the opposite face and adjacent to the end of the member as shown in Figure 4.16a, kc,90 = I 2.38 -

0 0

Post a comment