Organic Contaminants

Benzene 0.005

Endrin 0.0002

Lindane 0.004

Methoxy chlor 0.1

1,2-dichloroethane 0.005

1,1 -dichloroethylene 0.007

1,1,1 -trichloroethane 0.200 Total Trihalomethanes (TTHMs) 0.10

Toxaphene 0.005

Trichloroethylene 0.005

Para-dichlorobenzene 0.075

Secondary Drinking Water Standards Contaminant **SMCL


Foaming Agents (MBAS) Odor

15 color units 0.5 mg/L 3 threshold odor number

*Maximum Contaminant Level

**Secondary Maximum Contaminant Level

AC filtration does remove some organic chemicals that can be harmful if present in quantities above the EPA Health Advisory Level (HAL). Included in this category are trihalomethanes (THM), pesticides, industrial solvents (halogenated hydrocarbons), polychlorinated biphenyls (PCBs), and polycyclic aromatic hydrocarbons (PAHs).

THMs are a byproduct of the chlorination process that most public drinking water systems use for disinfection. Chloroform is the primary THM of concern. EPA does not allow public systems to have more than 100 parts per billion (ppb) of THMs in their treated water. Some municipal systems have had difficulty in meeting this standard.

The Safe Drinking Water Act mandates EPA to strictly regulate contaminants in community drinking water systems. As a result, organic chemical contamination of municipal drinking water is not likely to be a health problem. Contamination is more likely to go undetected and untreated in unregulated private water systems. AC filtration is a viable alternative to protect private drinking water systems from organic chemical contamination. Note that eadon gas can also be removed from water by AC filtration, but actual removal rates of radon for different types of AC filtration equipment have not been established. This makes AC ideal for use both in industrial applications as well as in residential.. Similar to other types of water treatment, AC filtration is effective for some contaminants and not effective for others. AC filtration does not remove microbes, sodium, nitrates, fluoride, and hardness. Lead and other heavy metals are removed only by a very specific type of AC filter. Unless the manufacturer states that its product will remove heavy metals, one should assume that the AC filter is not effective in removing them.

AC works by attracting and holding certain chemicals as water passes through it. AC is a highly porous material; therefore, it has an extremely high surface area for contaminant adsorption. The equivalent surface area of 1 pound of AC ranges from 60 to 150 acres. AC is made of tiny clusters of carbon atoms stacked upon one another. The carbon source is a variety of materials, such as peanut shells or coal. The raw carbon source is slowly heated in the absence of air to produce a high carbon material. The carbon is activated by

Regular water testing is recommended to reduce the risk of consuming contaminated water. Many contaminants are not detected by the senses. Even if contamination can be detected by color, smell, or taste, only a laboratory test can tell you the quantity of contaminant actually present. Testing should always be done by a reputable or certified laboratory. Prior to sending in your water sample, determine what you want your water tested for. Contact the laboratory to find out how to take a proper water sample. Remember, there are thousands of substances that can contaminate your water, and they all have slightly different chemical behavior. Proper sampling and handling for one type of contaminant may cause erroneous results for other types of contaminants.

passing oxidizing gases through the material at extremely high temperatures. The activation process produces the pores that result in such high adsorptive properties. The adsorption process depends on the following factors: 1) physical properties of the AC, such as pore size distribution and surface area; 2) the chemical nature of the carbon source, or the amount of oxygen and hydrogen associated with it; 3) chemical composition and concentration of the contaminant; 4) the temperature and pH of the water; and 5) the flow rate or time exposure of water to AC.

Waste Management And Control

Waste Management And Control

Get All The Support And Guidance You Need To Be A Success At Understanding Waste Management. This Book Is One Of The Most Valuable Resources In The World When It Comes To The Truth about Environment, Waste and Landfills.

Get My Free Ebook

Post a comment