Forces of physical attraction or adsorption of contaminants to the pore walls is the most important AC filtration process. The amount and distribution of pores play key roles in determining how well contaminants are filtered. The best filtration occurs when pores are barely large enough to admit the contaminant molecule. Because contaminants come in all different sizes, they are attracted differently depending on pore size of the filter. In general AC filters are most effective in removing contaminants that have relatively large molecules (most organic chemicals). Type of raw carbon material and its method of activation will affect types of contaminants that are adsorbed. This is largely due to the influence that raw material and activation have on pore size and distribution.
Processes other than physical attraction also affect AC filtration. The filter surface may actually interact chemically with organic molecules. Also electrical forces between the AC surface and some contaminants may result in adsorption or ion exchange. Adsorption, then, is also affected by the chemical nature of the adsorbing surface. The chemical properties of the adsorbing surface are determined to a large extent by the activation process. AC materials formed from different activation processes will have chemical properties that make them more or less attractive to various contaminants. For example chloroform is adsorbed best by AC that has the least amount of oxygen associated with the pore surfaces. You can't possibly determine the chemical nature of an AC filter. However, this does point out the fact that different types of AC filters will have varying levels of effectiveness in treating different chemicals.
Was this article helpful?